Endura 250
FEATURES AND BENEFITS
- The new ENDURA IM series represents the un-compromised move towards performance & reliability in this demanding world
- These simple and sturdy machines are easy to operate, easy in trouble shooting & offer excellent welding results on steel, stainless steel and aluminium metals
- Temperature controlled cooling, where the fan operates only when required reducing power consumption, noise & amount of air borne contamination into machine
- Displays thermal overload protection along with the part that senses the overload. Helps prevent damage if the duty cycle is exceeded or airflow is blocked. Eases troubleshooting.
- Displays single phase protection along with the specific missing line thereby preventing misuse& reducing downtime.
- Digital panel meters are fitted as a standard and are easy to read at night and at a distance
- The switch and pc board are placed in a low dust compartment
- 230 VAC receptacles at the rear provide auxiliary power for per heater.
- Specially designed transformer for low energy consumption/ high power factory/ high efficiency
- Compact & sturdy wire feeder for trouble free performance
RECOMMENDED APPLICATION
- Cylinder trolley
- Water cooling unit
- Water cooled torch
- Auto darkening helmet
| TECHNICAL DATA | ENDURA 250 | UNIT |
|---|---|---|
| Input Supply | 415V/3O/50HZ | V / Hz |
| Fuse(slow) | 16 | A |
| Input power@ 60% | 6.8 | KVA |
| Power factor | .92 | – |
| Open circuit voltage | 17-38 | V |
| Welding current range | 40-300 | A |
| Duty cycle | 300A/32V @ 35% 250A/28V @ 60% 190A/24V @ 100% | A / V |
| Cooling | AF | – |
| Insulation class | H | – |
| Protection class | IP 23 | – |
| Voltage setting | 10 | – |
| Operating modes | 2T/4T/ SPOT | – |
| Antis tick | Provided | sec |
| Spot sec | 0.5-5.0 | sec |
| Digital meters | Provided | – |
| Weight | 73 | Kg |
| Dimensions (L*W*H) | 595*360*600 | mm |
| Wire feeder | 2- ROLL | – |
| Wire size | 0.8-1.2 | mm |
| Wire feed speed | 1-20 | m/min |
There are no reviews yet.